CoolMasterNet - HVAC Panasonic/Sanyo VRF installation guide

  1. HVAC Communication Terminals
    HVAC outdoor connection

    mceclip1.png

    * For Heat Recovery systems the connection is at outdoor units only.
    * Polarity is not required on the HVAC communication line.

  2. Connecting to the line plug
    Secure the cables in the L1 line plug.

  3. Plugging to the CoolMasterNet
    Insert the plug in to the CoolMasterNet L1 socket.

  4. Check DIP Switches are set correctly
    Dip switches setup for VRF HVAC system on L1.

    mceclip2.png

 

mceclip0.png
Was this article helpful?
0 out of 0 found this helpful