CoolMaster - HVAC Fujitsu VRF installation guide

This article applies to the following CoolMaster products:

  • CoolMaster
  • CoolMasterPro 
  • CoolMasterNet
  1. HVAC Communication Terminals
    HVAC outdoor connection

  2. Connecting to the Echelon adapter


    Echelon U10 USB Network Interface (TP/FT-10) adapter is required for connecting to Fujitsu VRF. (Not supplied by CoolAutomation)


  3. Connect Echelon via USB extensions cable

    Connect the USB Extension cable (A-Male to A-Female) to the Echelon adapter. (Not supplied by CoolAutomation)


  4. Plug in to the CoolMaster L8

    Insert the USB cable into the L8 USB host.

Was this article helpful?
0 out of 1 found this helpful