Assigning VRF brand to a CoolMasterNet line

Applies to: CoolMasterNet      CloudBox

Assigning a VRF brand to a specific line on your Cool MasterNet is easy to do. 

The steps below will guide you through the process

 

  1. Select "All Units" to get to the Settings on your CMNET device
    mceclip0.png

  2. Select "HVAC Line"
    mceclip1.png

  3. Select the HVAC line you would like to be assigned with the new HVAC brand
    mceclip2.png

  4. Select the correct HVAC brand to your requirements
    mceclip3.png

  5. Verify that the Dip switches are set properly for the brand. If the Dip switches are misconfigured, a red warning message will be shown.

  6. For the changes to take place, you will need to reset your CMNET.

Was this article helpful?
0 out of 0 found this helpful