CoolMasterNet - Manually configuring the network settings

By default,  the CoolMasterNet is set to DHCP (automatic IP address received from the network).

To manually configure the network setting, you will need first to disable DHCP to prevent from CoolMasterNet from being assigned with an IP address automatically.

To disable DHCP and set your own network information, follow these steps:

  • Click the Settings icon
    mceclip0.png 
  • Click on Network Settings
    mceclip1.png
  • Change the toggle button from "ON" to :OFF"
    mceclip2.png
  • Set the IP address by clicking the "IP" line. Then set the IP address
    mceclip3.png
  • Set the Netmask address by clicking the "Netmask" line. Then set the Netmask IP address
    mceclip4.png
  • Set the Gateway address by clicking the "Gateway" line. Then set the Gateway IP address
    mceclip5.png
  • After changing these settings, reset the device (Power Off).
Was this article helpful?
0 out of 0 found this helpful