CoolMaster - How to set up BMS

This article applies to the following CoolMaster products

  • CoolMaster
  • CoolMasterPro 
  • CoolMasterNet
  1. From the Main screen, tap the Gear icon. The following screen is displayed.
    mceclip0.png
  2. Select BMS Settings by tapping the > button. The following screen is displayed.
    mceclip1.png
  3. Enable ModBus and ModBus RTU on L3
    mceclip2.png
  4. Reset the device
To enable BACnet IP and BACnet MS/TP, contact Coolautomation support.
Was this article helpful?
0 out of 0 found this helpful