CoolMaster - Changing unit's MODE setting

This article applies to the following CoolMaster products

  • CoolMaster
  • CoolMasterPro 
  • CoolMasterNet

Basic operational controls like Unit On/Off, Set Temperature, Fan speed and Unit mode can be performed from the main screen by selecting an indoor unit.

Select the desired indoor unit by tapping the ">" button to enter the unit and perform other control operations.

mceclip0.png

On the displayed screen you can change the following settings by tapping on the corresponding setting:

  • FAN SPEED (options: Low, Medium, High, Top, Auto)
  • Temperature Set Point (repeatedly tap the respective arrow to increase or decrease the temperature set point)
  • Room Temperature indication (reported by the VRF system)
  • Unit's mode

mceclip1.png

 

Tap the Mode setting to select unit mode (Cool, Heat, Dry, Fan, Auto).

exclamation-point-exclamation-point-sign-icon-with-ball-symbol-bowling-sport-transparent-png-2063786.png

  • Mode change can only be done for all connected indoor units. It is not available for each individual indoor unit.
  • Auto and Dry modes are available only in systems that support these modes.

mceclip0.png

* This sign is displayed only on Master indoor unit, which is responsible for system Cool/Heat transition, available only on Daikin.

To view the Cool/Heat Master screen, tap on the above-referenced sign (*). The screen on the left is displayed.

To enable the Cool/Heat master, tap on screen center. The screen on the right is displayed. The Master feature is only available and required for Daikin only.

 

mceclip1.png

exclamation-point-exclamation-point-sign-icon-with-ball-symbol-bowling-sport-transparent-png-2063786.png

  • To change a Master unit, you must first turn Off the currently active Master unit.

 

Was this article helpful?
0 out of 0 found this helpful