CoolMasterNet - Setting limitations on unit's temperature settings

Basic operational controls like Unit On/Off, Set Temperature, Fan speed and Unit mode can be performed from the main screen by selecting an indoor unit.

Select the desired indoor unit by tapping the ">" button to enter the unit and perform other control operations.

mceclip0.png

Tap the Temperature Limit Settings icon

mceclip0.png

Note: The limits apply on all control interfaces (Wired Remote, BMS, Home Automation, Coolautomation Apps suite).

  • Select temperature limits for Cool (1) and Heat (2) separately.
  • Select Low and High limits and tap Apply (3).
  • Tapping “Apply to Lxxx” (4) applies the limits to all units connected to the Lxxx line.

mceclip1.png

Was this article helpful?
0 out of 0 found this helpful