Hot to connect CoolPlug PN | SA | TO

CoolPlug Panasonic/Sanyo?Toshiba

 

  1. Connecting the CoolPlug to the PN/SA/TO Indoor Unit
    Connect the CoolPlug's [A], [B] terminals to [A], [B] terminals to the indoor unit (Sanyo/Toshiba) or to [R1], [R2] (Panasonic). Use HVAC manufacturer's Installation Manual for instructions on finding those terminals on the indoor unit PCB.
  2. Connecting CoolPlug to the CooLinkHub
  3. Optional: Connect the wired remote to the WRC socket
mceclip0.png

 

* The connection is nonpolar.
** Master/Slave configuration will be done by the CoolPlug automatically.
Was this article helpful?
0 out of 0 found this helpful