00:00: This article explains how to control the operation status and mode of your system using IOC control app.
00:09: Open the main menu.
00:11: Navigate to the System Control section.
00:15: Open the system settings panel to create a new system.
00:19: Enter your system name to identify it within cool automation.
00:23: Open the selection menu to choose system brand.
00:29: Choose the CoolAutomation device the system is connected to.
00:33: Add system units.
00:36: Select the suitable units to add it to your system setup.
00:42: Note that a unit can only be included in one system.
00:46: Add the selected units to your system to finalize unit inclusion.
00:51: Save your system configuration to apply the changes.
00:55: Go back to the system control to adjust system status and mode.
01:00: Access the mode controls to manage the system's operational state.
01:04: Confirm the mode change to apply the new operational mode.
01:08: Here you can also turn the system on/off.
01:13: This article guided you through controlling the operation status and mode of your system using cool automation.
01:19: You learned how to configure a new system, add units and save your settings, effectively.
01:24: For more information refer to related articles on system management and unit configuration.