Remote Terminal Access to field-installed Devices (via Professional App)

To watch the video format of this tutorial, click here: [VIDEO TUTORIAL] Remote Terminal Access to field-installed Devices


For the new CoolMaster-EDGE Terminal Command Line, click here: CoolMaster EDGE - Terminal Command Line

For the CoolMaster Programmer Reference Manual, click here: CoolMaster PRM - Programmers Reference Manual

For the CooLinkHub Programmer Reference Manual, click here: CooLinkHUB PRM - Programmers Reference Manual


00:00: This quick tutorial guides power users through accessing and managing Cool

00:03: Automation devices remotely, via our Cool Professional app, with terminal line

00:08: command access to the field-installed device configuration page.

00:13: There are a few requirements.

00:14: This requires that you have an internet connection established with the device.

00:19: The device must be registered to a site on the Cool Automation cloud,

00:22: and the site must have an active License with a Professional App Package.

00:27: The final requirement is that your user access must be at the admin level.

00:32: In the Professional App, navigate to your site.

00:38: Click on Site Management, go to Site Configuration, and you will see the serial

00:42: numbers of controllers installed at this site.

00:45: Hover over device and it will tell you the firmware version and the type of device.

00:50: In this site we have a CoolMaster EDGE and a CoolMaster NET

00:59: We have a brand new button here called the device configuration.

01:02: When you click on the device configuration, it opens a new tab in your browser.

01:07: This tab provides remote console access to the terminal,

01:10: allowing you to operate commands on your device

01:13: remotely.

01:23: I can see the status of the cloud connectivity to the various Cool Automation

01:26: servers.

01:28: And most importantly, you can see the indoor unit status points.

01:32: And you can see the outdoor unit status points as well.

01:36: If I go back to the main tab of the Professional App, let's click on the CoolMaster Edge

01:40: device configuration.

01:43: The CoolMaster EDGE has a more powerful cloud Connected device console. You can manipulate

01:47: the line settings and various other things with a full graphical user interface,

01:51: remotely.

01:53: Navigate to the terminal tab for the cool master Edge to access the command line

01:57: interface.

01:59: From here you can run any number of commands directly on the device, as well as

02:03: evaluate

02:04: the line status values for each of the physical interfaces on the device.

02:08: The CoolMaster Programmer Reference Manual provides a full list of commands available

02:12: on the Cool Master family of devices.

02:15: Thank you for watching.

Was this article helpful?
0 out of 0 found this helpful