This article applies to the following CoolMaster products:
- CoolMaster
- CoolMasterPro
- CoolMasterNet
This article also applies to the CloudBox.
By default, the CoolMaster is set to DHCP (automatic IP address received from the network).
To manually configure the network setting, you will need first to disable DHCP to prevent from CoolMaster from being assigned with an IP address automatically.
To disable DHCP and set your own network information, follow these steps:
- Click the Settings icon
- Click on Network Settings
- Change the toggle button from "ON" to :OFF"
- Set the IP address by clicking the "IP" line. Then set the IP address
- Set the Netmask address by clicking the "Netmask" line. Then set the Netmask IP address
- Set the Gateway address by clicking the "Gateway" line. Then set the Gateway IP address
- After changing these settings, reset the device (Power Off).