How to connect DK (Daikin) Siesta

Yoram

Last update: April 03, 2022 09:11

DKS (Daikin) - Siesta Series

Connecting CoolPlug to the Daikin unit.
Connect the cable (supplied with the CoolPlug) to the port labeled “Indoor” on the CoolPlug and the corresponding connector on the indoor unit.
Use Daikin's Installation Manual for instructions on where to connect to the Daikin indoor PCB.
Connecting CoolPlug to the CooLinkHub
- Wireless Mode: Check that the devices were paired successfully. See how to pair in the Wireless CooLinkHub & CoolPlug Installation Article
- Wired Mode: Connect the signal wires of the PBUS cable, using [VDC-], [1] and [2] terminals on the CooLinkHub, to the corresponding [-], [1], and [2] terminals on the CoolPlug.
  
  Please refer to the PBUS connection diagram on Wired connection - PBUS (PlugBus) topology article.
Optional: Connect the wired remote to the WRC socket on the CoolPlug. The cable is supplied with the WRC.

Related articles