How to connect CoolPlug PN | SA | TO (CAPRA)

Yoram

Last update: October 26, 2022 18:08

Connecting the CoolPlug to the Panasonic units with CAPRA connectors Connect the CAPRA cable (supplied with the CoolPlug) between the CoolPlug RJ-11 connector (CN - CNT) and the CN - CNT port on the indoor unit’s PCB. Use HVAC manufacturer’s installation manual for the location of CN - CNT connector on the indoor unit’s PCB.
Connecting CoolPlug to the CooLinkHub
- Wireless Mode: Check the devices were paired successfully. See how to pair in the Wireless CooLinkHub & CoolPlug Installation Article
- Wired Mode: Connect the signal wires of the PBUS cable coming from the [VDC-], [1], and [2] terminals on the CooLinkHub to the corresponding [-], [1], and [2] terminals on the CoolPlug.
  .
  
  Please refer to the PBUS connection diagram on Wired connection - PBUS (PlugBus) topology article.

Related articles